Daemon News Ezine BSD News BSD Mall BSD Support Forum BSD Advocacy BSD Updates

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SiI 3114 SATA150 controller


   I bought a motherboard which come with a SiI 3114 chipset.
FreeBSD works fine with it, i just cant do RAID using the Bios because FreeBSD does not recognizes it.

   Anyway i can create the RAID using atacontrol :

   ar1: 156334MB <FreeBSD PseudoRAID RAID1> status: READY
   ar1: disk0 READY (master) using ad12 at ata6-master
   ar1: disk1 READY (mirror) using ad14 at ata7-master

I dont know if the system have the same performance using this PseudoRAID.

   Does any one have a fix to FreeBSD recognize SiI 3114 metadata?
I took a loot at /usr/src/sys/dev/ata/ata-raid.c, it have some things about a "Silicon Image Medley" metadata, unfortunally i dont have knowledgement to try to fix it.

   Can anyone help me?
   Dmesg output attached.

Thanks in advance
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #0: Thu Jan  5 18:08:43 BRT 2006
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2211.34-MHz K8-class CPU)
 Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
 AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1073676288 (1023 MB)
avail memory = 1025110016 (977 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xd2403000-0xd2403fff at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd2404000-0xd24040ff at device 2.1 on pci0
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <EHCI (generic) USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
atapci0: <nVidia nForce4 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <nVidia nForce4 SATA150 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xd2402000-0xd2402fff irq 20 at device 7.0 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
atapci2: <nVidia nForce4 SATA150 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xd2401000-0xd2401fff irq 21 at device 8.0 on pci0
ata4: <ATA channel 0> on atapci2
ata5: <ATA channel 1> on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci5: <ACPI PCI bus> on pcib1
pci5: <display, VGA> at device 6.0 (no driver attached)
atapci3: <SiI 3114 SATA150 controller> port 0x9000-0x9007,0x9400-0x9403,0x9800-0x9807,0x9c00-0x9c03,0xa000-0xa00f mem 0xd1000000-0xd10003ff irq 19 at device 10.0 on pci5
ata6: <ATA channel 0> on atapci3
ata7: <ATA channel 1> on atapci3
ata8: <ATA channel 2> on atapci3
ata9: <ATA channel 3> on atapci3
nve0: <NVIDIA nForce MCP9 Networking Adapter> port 0xb000-0xb007 mem 0xd2400000-0xd2400fff irq 22 at device 10.0 on pci0
nve0: Ethernet address 00:11:d8:9a:a4:82
miibus0: <MII bus> on nve0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
nve0: Ethernet address: 00:11:d8:9a:a4:82
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci2: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci1: <ACPI PCI bus> on pcib5
acpi_tz0: <Thermal Zone> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xcc000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2211343417 Hz quality 800
Timecounters tick every 1.000 msec
ad8: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata4-master SATA150
ad10: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata5-master SATA150
ad12: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata6-master SATA150
ad14: 156334MB <Maxtor 6Y160M0 YAR51HW0> at ata7-master SATA150
ar0: 312668MB <nVidia MediaShield RAID0 (stripe 64 KB)> status: READY
ar0: disk0 READY using ad8 at ata4-master
ar0: disk1 READY using ad10 at ata5-master
ar1: 156334MB <FreeBSD PseudoRAID RAID1> status: READY
ar1: disk0 READY (master) using ad12 at ata6-master
ar1: disk1 READY (mirror) using ad14 at ata7-master
Trying to mount root from ufs:/dev/ar0s1a