[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
i386/92501: Hang on boot with ACPI enabled on A6R notebook
>Synopsis: Hang on boot with ACPI enabled on A6R notebook
>Arrival-Date: Sun Jan 29 13:00:11 GMT 2006
>Originator: Alexander I. Mogilny
FreeBSD sg.intra 7.0-CURRENT FreeBSD 7.0-CURRENT #2: Thu Jan 26 09:18:32 EET 2006 root@xxxxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/SG i386
I am using FreeBSD on my notebook. Notebook model is ASUS A6B00R (A6R series). The problem is that when I am trying to boot with ACPI enabled my system hangs before disk device recognition and mounting. When I do not load ACPI FreeBSD does not recognize sound, card reader and wlan devices and I receive following kernel message while boot:
Interrupt storm detected on "irq11:"; throttling interrupt source
irq11 works with following devices:
ohci0: <ATI SB400 USB Controller> mem 0xfebff000-0xfebfffff irq 11 at device 19.0 on pci0
ohci1: <ATI SB400 USB Controller> mem 0xfebfe000-0xfebfefff irq 11 at device 19.1 on pci0
ehci0: <ATI SB400 USB 2.0 controller> mem 0xfebfd000-0xfebfdfff irq 11 at device 19.2 on pci0
Here is my vmstat -i:
> vmstat -i
interrupt total rate
irq0: clk 5248187 1000
irq1: atkbd0 8323 1
irq5: rl0 27334 5
irq7: ppc0 1 0
irq8: rtc 671710 127
irq10: pcm0 1 0
irq11: ohci0 ohci+ 5175788 986
irq12: psm0 240 0
irq13: npx0 1 0
irq14: ata0 38815 7
irq15: ata1 41 0
Total 11170441 2128
BIOS update is impossible due to no new versions released yet.
Usage of FreeBSD of RELENG_6 cvs tag gave some results. System booted with ACPI,
but my network card rl0 did not work (Watchdog timeout). This was the reason why I cvsuped to 7.0-CURRENT.
Google search and search over existing problem reports on this topic gave following results:
There was a patch published on the following page:
(thread theme was Thinkpad 600e interrupt storm)
It was impossible to apply this patch - kernel source differed from patch source
There was also an advice to comment out 'apic' device.
I commented it out. System booted with ACPI but I again received rl0 watchdog timeout message.
I would like to help you in solving of this problem. I know that you have got not much time to work at received problem reports so due to my good knowledge of C I may work at this problem. I would only like to receive instructions of possible problem. I gess this would be enough.
Here are dmesgs:
1. Normal boot with ACPI disabled:
2. Boot with apic compiled out but ACPI enabled:
3. Boot with USB 2.0 disabled in BIOS and ACPI enabled:
Here is my kernel:
Boot with ACPI enabled and apic compiled in.
Disable ehci device in BIOS.