[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[no subject]
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa
irq]
How do I use this device? For that matter, can it be used?
I have tried using the standard ppp.conf:
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cuaa1
set speed 115200
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set timeout 180
enable dns
papchap:
set phone 863-9741
set authname dan
set authkey password
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
add default HISADDR
/var/log/ppp.log shows this:
tun0: Command: padpchap: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
0.0.0.0
tun0: Command: papchap: add default HISADDR
tun0: Phase: PPP Started (ddial mode).
tun0: Phase: bundle: Establish
tun0: Phase: deflink: closed -> opening
tun0: Warning: deflink: /dev/cuaa1: Bad file descriptor
tun0: Chat: Failed to open device
tun0: Phase: deflink: Enter pause (30) for redialing.
thanks
To Unsubscribe: send mail to majordomo@xxxxxxxxxxx
with "unsubscribe freebsd-mobile" in the body of the message